Peugeot 206 @ Naza 206 Bestari

Anything about Peugeot 206 (Naza 206 Bestari)

Wheel Nut Cover

Mileage: 96,966KM
Do It Yourself: Yes
Difficulty: Easy

Yay!… Wheel nut cover ordered online (after returned it due to wrong size) has arrived. But the joy was short lived as I stumbled with another issue.

 

 

 

 Manufactured by Bimecc Italy Manufactured by Bimecc Italy

 

I chose this product because of Peugeot original wheel nut cover is too expensive and sell by the unit. The aftermarket wheel nut cover quality is good but as mentioned above I did found out that it was taller than I expected. Thus, the nut will protrude more instead of flush in the wheel rim.

 
I have no choice but to trim off a bit the nuts but there are 16 of them….
 

The tools, coping saw is your best friend for this kind of jobThe tools, coping saw is your best friend for this kind of job

 

Masking tape was used to protect the chrome and as guidanceMasking tape was used to protect the chrome and as guidance

 

Only quarter of inch need to be trimmed offOnly quarter of inch need to be trimmed off

 

The excess after the final numberThe excess after the final number

 
For comparison…
 

Before the modBefore the mod

 

After the modAfter the mod

 

Without the wheel nut coversWithout the wheel nut covers

 

With the coversWith the covers

 

2 comments on “Wheel Nut Cover

    1. I bought it through e-Bay. Scout around local portal sites, you may stumble upon a used unit. It was hard during my time but I saw some one sells it locally.

Leave a Reply

%d bloggers like this: